Calcium Sulphonate Complex Grease CSC200
Premium calcium sulfonate complex grease offering outstanding corrosion protection and water resistance for severe duty applications.
Industry Applications:
Key Features
Applications
Served Industries
Technical Data Sheet
Typical technical characteristics and operating guidance for Calcium Sulphonate Complex Grease CSC200.
| Property | Test Method | Typical Value |
|---|---|---|
| NLGI Grade | ASTM D217 | 2 |
| Base Oil Viscosity @ 40°C | ASTM D445 | ~460 cSt |
| Dropping Point | ASTM D2265 | >300°C |
| Operating Temperature | — | -30°C to +180°C(intermittent peak) |
| Thickener | — | Calcium sulfonate complex |
| Four-Ball Weld Load | ASTM D2596 | >400 kgf |
| Timken OK Load | ASTM D2509 | >60 lbs |
Operating Parameters
Temperature Range
-30°C to +180°C
(continuous service)
Base Oil Viscosity @ 40°C
~460 cSt
Service Life
Condition dependent
Consistent Performance
Formulations are developed for stable viscosity, wear protection and contamination control across the stated operating range.
Optimized Formulation
Engineered for stable film strength and anti-wear performance, supporting longer service intervals where operating conditions and oil analysis allow.
Quality Assured
Manufactured under ISO 9001:2015 quality management system with full batch traceability and certificate of analysis.
Application Guide
Step-by-step instructions for optimal use of Calcium Sulphonate Complex Grease CSC200 in Marine & Offshore applications.
Preparation
Ensure the application surface is clean, dry, and free from contaminants. Remove any existing lubricant residues using appropriate cleaning agents. For Marine equipment applications, verify equipment is at operating temperature.
Application Method
Apply Calcium Sulphonate Complex Grease CSC200 using standard industrial equipment. For grease products, use automatic lubrication systems or manual grease guns. For liquid lubricants, ensure proper filling procedures and avoid contamination during transfer.
Recommended Dosage
Follow OEM recommendations for fill quantities. For Marine & Offshore applications, typical re-lubrication intervals range from 1,000 to 5,000 operating hours depending on conditions. Monitor performance and adjust intervals based on actual operating parameters.
Performance Monitoring
Regularly inspect lubricant condition and equipment performance. Check for signs of degradation, contamination, or unusual wear. Schedule oil analysis every 6 months for critical applications to optimize maintenance intervals.
Storage Recommendations
- Store in a cool, dry place between 5°C and 35°C
- Keep containers sealed when not in use
- Avoid direct sunlight and moisture exposure
- Shelf life: 5 years from manufacture date when stored properly
Safety Information
- Refer to Safety Data Sheet (SDS) before use
- Use appropriate PPE: gloves and safety glasses
- Ensure adequate ventilation in application area
- Dispose of used lubricant according to local regulations
Related Products
Premium Grease EP-2
High-performance lithium complex grease designed for extreme pressure applications in heavy industrial equipment. Provides superior protection against wear and corrosion.
Multi-Purpose Grease MP-3
Versatile multi-purpose grease suitable for a wide range of industrial and automotive applications.
High-Temperature Grease SCS-5
Specialized high-temperature grease formulated for continuous operation at elevated temperatures up to 250°C.