High Temperature Ceramic Grease MC2200
Advanced ceramic-based synthetic grease engineered for continuous operation at temperatures up to 1200°C in specialized industrial applications. Provides exceptional thermal stability and long-term lubrication in extreme heat environments.
Industry Applications:
Key Features
Applications
Served Industries
Technical Data Sheet
Typical technical characteristics and operating guidance for High Temperature Ceramic Grease MC2200.
| Property | Test Method | Typical Value |
|---|---|---|
| Operating Temperature | — | -40°C to +1200°C (two-stage: synthetic base oil / ceramic solid film) |
| NLGI Grade | ASTM D217 | 2 |
| Base Oil | — | Synthetic ester |
| Thickener | — | Ceramic/synthetic complex |
| Dropping Point | ASTM D2265 | >350°C (non-melt above) |
| Appearance | Visual | Gray paste |
| Four-Ball EP | ASTM D2596 | >400 kgf |
At moderate temperatures the synthetic base oil lubricates conventionally; once it reaches its thermal limit the ceramic solids form a dry film that continues to carry the load up to 1200°C.
Operating Parameters
Temperature Range
-40°C to +1200°C continuous (ceramic dry film above base oil limit)
Viscosity Grade
Refer to data sheet
Service Life
Condition dependent
The synthetic base oil provides conventional lubrication until it reaches its thermal limit, after which the ceramic phase takes over as a dry film. This two-stage mechanism is what allows MC2200 to remain effective far beyond the melting point of conventional grease.
Frequently Asked Question
How can MC2200 lubricate at 1200°C when conventional greases have long melted?
MC2200 combines a synthetic base oil with ceramic solids. At moderate temperatures the base oil lubricates normally; as it reaches its thermal limit the ceramic phase forms a dry film that carries the load, keeping the product effective at temperatures up to 1200°C.
Consistent Performance
Formulations are developed for stable viscosity, wear protection and contamination control across the stated operating range.
Optimized Formulation
Engineered for stable film strength and anti-wear performance, supporting longer service intervals where operating conditions and oil analysis allow.
Quality Assured
Manufactured under ISO 9001:2015 quality management system with full batch traceability and certificate of analysis.
Application Guide
Step-by-step instructions for optimal use of High Temperature Ceramic Grease MC2200 in General Industrial applications.
Preparation
Ensure the application surface is clean, dry, and free from contaminants. Remove any existing lubricant residues using appropriate cleaning agents. For Kiln car bearings applications, verify equipment is at operating temperature.
Application Method
Apply High Temperature Ceramic Grease MC2200 using standard industrial equipment. For grease products, use automatic lubrication systems or manual grease guns. For liquid lubricants, ensure proper filling procedures and avoid contamination during transfer.
Recommended Dosage
Follow OEM recommendations for fill quantities. For General Industrial applications, typical re-lubrication intervals range from 1,000 to 5,000 operating hours depending on conditions. Monitor performance and adjust intervals based on actual operating parameters.
Performance Monitoring
Regularly inspect lubricant condition and equipment performance. Check for signs of degradation, contamination, or unusual wear. Schedule oil analysis every 6 months for critical applications to optimize maintenance intervals.
Storage Recommendations
- Store in a cool, dry place between 5°C and 35°C
- Keep containers sealed when not in use
- Avoid direct sunlight and moisture exposure
- Shelf life: 5 years from manufacture date when stored properly
Safety Information
- Refer to Safety Data Sheet (SDS) before use
- Use appropriate PPE: gloves and safety glasses
- Ensure adequate ventilation in application area
- Dispose of used lubricant according to local regulations
Related Products
Premium Grease EP-2
High-performance lithium complex grease designed for extreme pressure applications in heavy industrial equipment. Provides superior protection against wear and corrosion.
Multi-Purpose Grease MP-3
Versatile multi-purpose grease suitable for a wide range of industrial and automotive applications.
High-Temperature Grease SCS-5
Specialized high-temperature grease formulated for continuous operation at elevated temperatures up to 250°C.