LONGLIFE-NON MELT OPEN GEAR GREASE GL8
Non-melt open gear grease designed for extreme pressure and high-temperature applications with superior adhesion and sprayability. Ideal for mining and offshore wire rope and open gear applications.
Industry Applications:
Key Features
Applications
Served Industries
Technical Data Sheet
Typical technical characteristics and operating guidance for LONGLIFE-NON MELT OPEN GEAR GREASE GL8.
| Property | Test Method | Typical Value |
|---|---|---|
| NLGI Grade | ASTM D217 | 0/00 |
| Base Oil Viscosity @ 40°C | ASTM D445 | ~680 cSt |
| Operating Temperature | — | -20°C to +200°C(intermittent peak) |
| Four-Ball EP | ASTM D2596 | >400 kgf |
| Adhesion | — | Excellent |
| Application Method | — | Spray/Brush |
Operating Parameters
Temperature Range
-20°C to +200°C
(continuous service)
Base Oil Viscosity @ 40°C
~680 cSt
Service Life
Condition dependent
Consistent Performance
Formulations are developed for stable viscosity, wear protection and contamination control across the stated operating range.
Optimized Formulation
Engineered for stable film strength and anti-wear performance, supporting longer service intervals where operating conditions and oil analysis allow.
Quality Assured
Manufactured under ISO 9001:2015 quality management system with full batch traceability and certificate of analysis.
Application Guide
Step-by-step instructions for optimal use of LONGLIFE-NON MELT OPEN GEAR GREASE GL8 in Mining applications.
Preparation
Ensure the application surface is clean, dry, and free from contaminants. Remove any existing lubricant residues using appropriate cleaning agents. For Mining open gears applications, verify equipment is at operating temperature.
Application Method
Apply LONGLIFE-NON MELT OPEN GEAR GREASE GL8 using standard industrial equipment. For grease products, use automatic lubrication systems or manual grease guns. For liquid lubricants, ensure proper filling procedures and avoid contamination during transfer.
Recommended Dosage
Follow OEM recommendations for fill quantities. For Mining applications, typical re-lubrication intervals range from 1,000 to 5,000 operating hours depending on conditions. Monitor performance and adjust intervals based on actual operating parameters.
Performance Monitoring
Regularly inspect lubricant condition and equipment performance. Check for signs of degradation, contamination, or unusual wear. Schedule oil analysis every 6 months for critical applications to optimize maintenance intervals.
Storage Recommendations
- Store in a cool, dry place between 5°C and 35°C
- Keep containers sealed when not in use
- Avoid direct sunlight and moisture exposure
- Shelf life: 5 years from manufacture date when stored properly
Safety Information
- Refer to Safety Data Sheet (SDS) before use
- Use appropriate PPE: gloves and safety glasses
- Ensure adequate ventilation in application area
- Dispose of used lubricant according to local regulations
Related Products
Premium Grease EP-2
High-performance lithium complex grease designed for extreme pressure applications in heavy industrial equipment. Provides superior protection against wear and corrosion.
Multi-Purpose Grease MP-3
Versatile multi-purpose grease suitable for a wide range of industrial and automotive applications.
High-Temperature Grease SCS-5
Specialized high-temperature grease formulated for continuous operation at elevated temperatures up to 250°C.