Premium Hydraulic Oil AW
Premium anti-wear hydraulic oil designed for high-pressure hydraulic systems in industrial equipment. 3 grade include ISO32 ,ISO46 , ISO68
Industry Applications:
Key Features
Applications
Served Industries
Technical Data Sheet
Typical technical characteristics and operating guidance for Premium Hydraulic Oil AW.
| Property | Test Method | Typical Value |
|---|---|---|
| ISO VG | — | 68 |
| Viscosity Index | ASTM D2270 | >95 |
| Flash Point | ASTM D92 | >220°C |
| Pour Point | ASTM D97 | <-15°C |
| FZG Load Stage | — | >10 |
Operating Parameters
Temperature Range
Refer to data sheet
ISO VG
68
Service Life
Condition dependent
Consistent Performance
Formulations are developed for stable viscosity, wear protection and contamination control across the stated operating range.
Optimized Formulation
Engineered for stable film strength and anti-wear performance, supporting longer service intervals where operating conditions and oil analysis allow.
Quality Assured
Manufactured under ISO 9001:2015 quality management system with full batch traceability and certificate of analysis.
Application Guide
Step-by-step instructions for optimal use of Premium Hydraulic Oil AW in General Industrial applications.
Preparation
Ensure the application surface is clean, dry, and free from contaminants. Remove any existing lubricant residues using appropriate cleaning agents. For Industrial hydraulics applications, verify equipment is at operating temperature.
Application Method
Apply Premium Hydraulic Oil AW using standard industrial equipment. For grease products, use automatic lubrication systems or manual grease guns. For liquid lubricants, ensure proper filling procedures and avoid contamination during transfer.
Recommended Dosage
Follow OEM recommendations for fill quantities. For General Industrial applications, typical re-lubrication intervals range from 1,000 to 5,000 operating hours depending on conditions. Monitor performance and adjust intervals based on actual operating parameters.
Performance Monitoring
Regularly inspect lubricant condition and equipment performance. Check for signs of degradation, contamination, or unusual wear. Schedule oil analysis every 6 months for critical applications to optimize maintenance intervals.
Storage Recommendations
- Store in a cool, dry place between 5°C and 35°C
- Keep containers sealed when not in use
- Avoid direct sunlight and moisture exposure
- Shelf life: 5 years from manufacture date when stored properly
Safety Information
- Refer to Safety Data Sheet (SDS) before use
- Use appropriate PPE: gloves and safety glasses
- Ensure adequate ventilation in application area
- Dispose of used lubricant according to local regulations
Related Products
Synthetic Gear Oil PAG (PAG Base)
Synthetic gear oil built on polyalkylene glycol (PAG) base stocks for high-temperature gearboxes and heavy-load drives. The PAG base oil delivers a high viscosity index, a strong oil film and resistance to thermal and oxidative breakdown at elevated sump temperatures, with load-carrying capability suited to heavily loaded, low-speed gearing.
Heavy Duty Synthetic Gear Oil SynMP220
Advanced synthetic gear oil engineered for wind turbine applications requiring ISO VG 220 viscosity. mPAO base oil delivers exceptional performance in extreme temperature conditions with superior gear protection.
Synthetic Gear Oil HPA (PAO Base)
High-performance synthetic gear oil designed for heavily loaded industrial gearboxes operating under severe conditions. PAO base oil formulation provides exceptional low-temperature fluidity and high-temperature stability.