PTFE Spray Lubricant PTFE-200
Dry PTFE spray lubricant providing long-lasting lubrication without attracting dust or dirt.
Industry Applications:
Key Features
Applications
Served Industries
Technical Data Sheet
Typical technical characteristics and operating guidance for PTFE Spray Lubricant PTFE-200.
| Property | Test Method | Typical Value |
|---|---|---|
| Base | — | PTFE dispersion |
| Propellant | — | Hydrocarbon |
| Operating Temperature | — | -180°C to +260°C (PTFE dry film) |
| Dry Film Thickness | — | 5-10 microns |
| Color | — | White |
The carrier solvent flashes off on application and leaves a PTFE film that lubricates without oil, remaining effective from -180°C to +260°C.
Operating Parameters
Temperature Range
-180°C to +260°C continuous (PTFE dry film)
Viscosity Grade
Refer to data sheet
Service Life
Condition dependent
PTFE-200 is a dry-film product rather than an oil-based grease: the carrier evaporates on application and the PTFE film alone carries the load. That is why it neither attracts dust nor migrates at either end of its range.
Frequently Asked Question
Does PTFE-200 need oil to lubricate?
No. The carrier solvent evaporates on application and leaves a 5–10 micron PTFE film on the surface. That film provides dry lubrication from -180°C to +260°C without attracting dust or dirt.
Consistent Performance
Formulations are developed for stable viscosity, wear protection and contamination control across the stated operating range.
Optimized Formulation
Engineered for stable film strength and anti-wear performance, supporting longer service intervals where operating conditions and oil analysis allow.
Quality Assured
Manufactured under ISO 9001:2015 quality management system with full batch traceability and certificate of analysis.
Application Guide
Step-by-step instructions for optimal use of PTFE Spray Lubricant PTFE-200 in General Industrial applications.
Preparation
Ensure the application surface is clean, dry, and free from contaminants. Remove any existing lubricant residues using appropriate cleaning agents. For Locks and hinges applications, verify equipment is at operating temperature.
Application Method
Apply PTFE Spray Lubricant PTFE-200 using standard industrial equipment. For grease products, use automatic lubrication systems or manual grease guns. For liquid lubricants, ensure proper filling procedures and avoid contamination during transfer.
Recommended Dosage
Follow OEM recommendations for fill quantities. For General Industrial applications, typical re-lubrication intervals range from 1,000 to 5,000 operating hours depending on conditions. Monitor performance and adjust intervals based on actual operating parameters.
Performance Monitoring
Regularly inspect lubricant condition and equipment performance. Check for signs of degradation, contamination, or unusual wear. Schedule oil analysis every 6 months for critical applications to optimize maintenance intervals.
Storage Recommendations
- Store in a cool, dry place between 5°C and 35°C
- Keep containers sealed when not in use
- Avoid direct sunlight and moisture exposure
- Shelf life: 5 years from manufacture date when stored properly
Safety Information
- Refer to Safety Data Sheet (SDS) before use
- Use appropriate PPE: gloves and safety glasses
- Ensure adequate ventilation in application area
- Dispose of used lubricant according to local regulations
Related Products
Food Grade Lubricant FG-1
Food-grade lubricant specifically formulated for incidental contact with food products.
Silicone Grease S260
Premium silicone grease providing excellent dielectric properties and water resistance for electrical applications.
Chain Lubricant
Specialized chain lubricant designed for industrial conveyor chains operating in demanding environments.Include High temperature chain lubricant,Waterproof chain lubrican,Penetranting lubricant