Synthetic Lithium Longlife Gear Grease MG100
Semi-fluid synthetic lithium gear grease specifically formulated for robotic gearboxes and sealed-for-life applications. Provides long-term lubrication in precision robotic joints and gear systems.
Industry Applications:
Key Features
Applications
Served Industries
Technical Data Sheet
Typical technical characteristics and operating guidance for Synthetic Lithium Longlife Gear Grease MG100.
| Property | Test Method | Typical Value |
|---|---|---|
| NLGI Grade | ASTM D217 | 00/000 |
| Base Oil | — | Synthetic ester/PAO |
| Thickener | — | Lithium complex |
| Operating Temperature | — | -30°C to +150°C(intermittent peak) |
| Viscosity @ 40°C | ASTM D445 | ~100 cSt |
| Dropping Point | ASTM D2265 | >260°C |
| Four-Ball Wear | ASTM D4172 | <0.35mm |
| Appearance | Visual | Smooth semi-fluid grease |
Operating Parameters
Temperature Range
-30°C to +150°C
(continuous service)
Viscosity @ 40°C
~100 cSt
Service Life
Condition dependent
Consistent Performance
Formulations are developed for stable viscosity, wear protection and contamination control across the stated operating range.
Optimized Formulation
Engineered for stable film strength and anti-wear performance, supporting longer service intervals where operating conditions and oil analysis allow.
Quality Assured
Manufactured under ISO 9001:2015 quality management system with full batch traceability and certificate of analysis.
Application Guide
Step-by-step instructions for optimal use of Synthetic Lithium Longlife Gear Grease MG100 in General Industrial applications.
Preparation
Ensure the application surface is clean, dry, and free from contaminants. Remove any existing lubricant residues using appropriate cleaning agents. For Robotic arm gearboxes applications, verify equipment is at operating temperature.
Application Method
Apply Synthetic Lithium Longlife Gear Grease MG100 using standard industrial equipment. For grease products, use automatic lubrication systems or manual grease guns. For liquid lubricants, ensure proper filling procedures and avoid contamination during transfer.
Recommended Dosage
Follow OEM recommendations for fill quantities. For General Industrial applications, typical re-lubrication intervals range from 1,000 to 5,000 operating hours depending on conditions. Monitor performance and adjust intervals based on actual operating parameters.
Performance Monitoring
Regularly inspect lubricant condition and equipment performance. Check for signs of degradation, contamination, or unusual wear. Schedule oil analysis every 6 months for critical applications to optimize maintenance intervals.
Storage Recommendations
- Store in a cool, dry place between 5°C and 35°C
- Keep containers sealed when not in use
- Avoid direct sunlight and moisture exposure
- Shelf life: 5 years from manufacture date when stored properly
Safety Information
- Refer to Safety Data Sheet (SDS) before use
- Use appropriate PPE: gloves and safety glasses
- Ensure adequate ventilation in application area
- Dispose of used lubricant according to local regulations
Related Products
Premium Grease EP-2
High-performance lithium complex grease designed for extreme pressure applications in heavy industrial equipment. Provides superior protection against wear and corrosion.
Multi-Purpose Grease MP-3
Versatile multi-purpose grease suitable for a wide range of industrial and automotive applications.
High-Temperature Grease SCS-5
Specialized high-temperature grease formulated for continuous operation at elevated temperatures up to 250°C.