Fire Resistant Hydraulic Fluid METALUB BioFR46
Environmentally acceptable fire-resistant hydraulic fluid (HFDR type) providing superior fire safety and biodegradability for high-risk applications. Combines fire protection with environmental responsibility.
Industry Applications:
Key Features
Applications
Served Industries
Technical Data Sheet
Typical technical characteristics and operating guidance for Fire Resistant Hydraulic Fluid METALUB BioFR46.
| Property | Test Method | Typical Value |
|---|---|---|
| ISO VG | — | 46 |
| Type | — | HFDR (Synthetic ester-based) |
| Fire Point | — | >300°C |
| Biodegradability | — | >60% (OECD 301B) |
| Viscosity Index | ASTM D2270 | >150 |
| Pour Point | ASTM D97 | <-30°C |
| Operating Temperature | — | -20°C to +120°C(intermittent peak) |
Operating Parameters
Temperature Range
-20°C to +120°C
(continuous service)
ISO VG
46
Service Life
Condition dependent
Consistent Performance
Formulations are developed for stable viscosity, wear protection and contamination control across the stated operating range.
Optimized Formulation
Engineered for stable film strength and anti-wear performance, supporting longer service intervals where operating conditions and oil analysis allow.
Quality Assured
Manufactured under ISO 9001:2015 quality management system with full batch traceability and certificate of analysis.
Application Guide
Step-by-step instructions for optimal use of Fire Resistant Hydraulic Fluid METALUB BioFR46 in General Industrial applications.
Preparation
Ensure the application surface is clean, dry, and free from contaminants. Remove any existing lubricant residues using appropriate cleaning agents. For Steel mill hydraulic systems applications, verify equipment is at operating temperature.
Application Method
Apply Fire Resistant Hydraulic Fluid METALUB BioFR46 using standard industrial equipment. For grease products, use automatic lubrication systems or manual grease guns. For liquid lubricants, ensure proper filling procedures and avoid contamination during transfer.
Recommended Dosage
Follow OEM recommendations for fill quantities. For General Industrial applications, typical re-lubrication intervals range from 1,000 to 5,000 operating hours depending on conditions. Monitor performance and adjust intervals based on actual operating parameters.
Performance Monitoring
Regularly inspect lubricant condition and equipment performance. Check for signs of degradation, contamination, or unusual wear. Schedule oil analysis every 6 months for critical applications to optimize maintenance intervals.
Storage Recommendations
- Store in a cool, dry place between 5°C and 35°C
- Keep containers sealed when not in use
- Avoid direct sunlight and moisture exposure
- Shelf life: 5 years from manufacture date when stored properly
Safety Information
- Refer to Safety Data Sheet (SDS) before use
- Use appropriate PPE: gloves and safety glasses
- Ensure adequate ventilation in application area
- Dispose of used lubricant according to local regulations
Related Products
Synthetic Gear Oil PAG (PAG Base)
Synthetic gear oil built on polyalkylene glycol (PAG) base stocks for high-temperature gearboxes and heavy-load drives. The PAG base oil delivers a high viscosity index, a strong oil film and resistance to thermal and oxidative breakdown at elevated sump temperatures, with load-carrying capability suited to heavily loaded, low-speed gearing.
Premium Hydraulic Oil AW
Premium anti-wear hydraulic oil designed for high-pressure hydraulic systems in industrial equipment. 3 grade include ISO32 ,ISO46 , ISO68
Heavy Duty Synthetic Gear Oil SynMP220
Advanced synthetic gear oil engineered for wind turbine applications requiring ISO VG 220 viscosity. mPAO base oil delivers exceptional performance in extreme temperature conditions with superior gear protection.